Aaman MahilBusiness Manager
Talk to us
A complete range of wipes, in multiple chemical saturations, sizes, absorbency, packaging and material, to meet the requirements of all our customers.
All our pre-saturated wipes are manufactured in a GMP cleanroom environment and are available in sterile and non-sterile with all materials being quality assurance tested.
Our wipes can be used in both aseptic and non-aseptic wipe downs of filling and packaging machinery, stainless steel, Lexan, polycarbonate, glass, and any critical surface that requires cleaning.
The InSpec range has the same chemistry throughout its formats: the burstable wipes copy their burstable mopheads offering a pre-saturated wipe.
Rolling one side allows the chemical to burst into the other half of the packet to saturate the dry mopheads. The operator simply tears the end, and rolls – then the mop is ready to use. This gives a longer shelf life and greater ease of use.

500ppm low odour, safe handling, low residue and fully effective sporicidal preparation of hypochlorous acid

Low residue, broad spectrum, quat free disinfectant/ cleaner

Exceptional quat disinfectant with proven efficacy against a wide range of bacteria, yeast and fungi

Rapid action – two minute kill time achieving the EN sporicidal standard
Our pre-sat wipe ranges offer a full portfolio to suit every customer’s requirements. Peelable pouches are not only in the standard formats, but also for stainless steel.

InSpec IPA is a ready-to-use 70% mixed with WFI quality water. Rapid action, low residue, fast-drying alcohol wipe.
4 different formats of IPA wipes:
Sachet: tear open sachets for single use wiping
Pouch: polyester/ cellulose peel open, low linting wipe
Tub: an economical solution for wiping applications
Pouch: knitted polyester, high spec, ultra sonic cut, ultra low linting wipes

InSpec sterile denatured alcohol 70% with WFI quality water, rapid action, low residue, fast-drying alcohol disinfectant.
2 different formats of DE wipes:
Pouch: polyester/ cellulose peel open, low linting wipe
Tub: an economical solution for wiping applications

Saturated with hydrogen peroxide concentrations of 3% or 6% and water for injection (WFI).
Constructed of a 100% continuous polyester fibre that is clean and absorbent.
12’’ x 12’’, sterile or non-sterile, 20 wipes per pack, 10 packs per case.

Saturated with 70% USP Isopropyl Alcohol and 30% water for injection (WFI).
Available in two materials: a 100% synthetic filament knit polyester or a non-woven 100% polyester.
Three packaging options: 20 wipes per pack, 30 wipes per pack, or 50 wipes per pack.

Hypo-Chlor wipes are saturated with sodium hypochlorite in concentrations of 0.25%, 0.52%, or 5.52% and USP water for injection (WFI).
Constructed of a 100% continuous polyester fibre that is clean and absorbent. Designed for intricate or sensitive locations where a spray down would create residues.
12’’ x 12’’, sterile or non-sterile 20 per pack or individually packaged.

Pre-saturated USP IPA wipe that is individually packaged and saturated with 70% IPA and water for injection (WFI).
Available in 6’’ x 6’’, 12’’ x 12’’, 18’’ x 18’’.

An innovation that resembles the shape of a dust mitten. The glove is saturated with 70% USP Isopropyl Alcohol and Water for Injection (WFI). Makes wiping in tight areas much easier.
The product utilises a non-linting, non-shedding polyester tube that is sewn at one end and then turned inside out. Provides 100% coverage of your hand.
8″ x 4″ individually packaged. Sterile.

Saturated with stainless steel cleaners, designed to clean metal in cleanroom operations.
12’’ x 12’’, individually packaged. Sterile.

Saturated with DAS stainless steel cleaner and lubricant. Designed to replace silicone on turntables, process liners and as a general lubricant to ensure bottles do not stick during movement towards the critical fill site.
12’’ x 12’’, individually packaged. Sterile.

Residue remover and cleaner ready to use wipe. Constructed of a 100% continuous polyester fibre that is clean and absorbent, designed to remove residue left behind from disinfecting agents.
12’’ x 12’’, 20/pk, Sterile or non-sterile formats.

Sodium Thiosulfate saturated wiper with 2% concentration, designed for cleaning, decontaminating, and neutralising surfaces in the ISO 5 sterile pharmacy compounding area.
12’’ x 12’’, 20/pk. Sterile.
Please enter the first two digits of your postcode below and click 'Find My Rep', so we can match you with your local sales representitive.
AB, BB, BD, BL, CA, CH, CW, DD, DE, DG, DH, DL, DN, EH, FK, FY, HD, HG, HS, HU, HX, IM, IV, KA, KW, KY, LA, LN, LS, ML, NE, NG, OL, PA, PH, PR, SK, SR, ST, TD, TS, WA, WF, WN, YO, ZE,
S0
S1
S2
S3
S4
S5
S6
S7
S8
S9
M0
M1
M2
M3
M4
M5
M6
M7
M8
M9
L0
L1
L2
L3
L4
L5
L6
L7
L8
L9
G0
G1
G2
G3
G4
G5
G6
G7
G8
G9
BA, BH, BS, CF, DT, EX, GY, JE, LD, LL, NP, PL, SA, SP, SY, TA, TQ, TR,
A41, A42, A45, A75, A81, A82, A84, A85, A86, A91, A92, C15, D1, D2, D3, D5, D7, D8, D9, D13, D10, D11, D15, D20, F52, F56, F92, F93, F94, H12, H14, H16, H18, H23, K32, K45, K56, K67, K78, N41, N91, R35
BT
A63, A67, A83, A94, A96, A98, D4, D6, D12, D14, D16, D18, D22, D24, E41, E45, E53, F12, F23, F26, F28, F31, F35, F42, F45, F91, H53, H54, H62, H65, H91, K78, N37, N39, R14, R21, R32, R42, R45, R51, R56, R93, R95, W12, W23, W91, Y14, Y21, Y25, Y34, Y35
AL, BN, BR, CB, CM, CO, CR, CT, CV, DA, DY, EC, EN, GL, GU, HA, HP, HR, IG, IP, KT, LE, LU, ME, MK, NN, NR, NW, OX, PE, PO, RG, RH, RM, SE, SG, SL, SM, SN, SO, SS, SW, TF, TN, WC, TW, UB, WD, WR, WS, WV,
W0
W1
W2
W3
W4
W5
W6
W7
W8
W9
B0
B1
B2
B3
B4
B5
B6
B7
B8
B9
E0
E1
E2
E3
E4
E5
E6
E7
E8
E9
N
E21, E25, E32, E34, E91, P12, P14, P17, P24, P25, P31, P32, P36, P43, P47, P51, P56, P61, P67, P72, P75, P81, P85, T12, T23, T34, T45, T56, V14, V15, V23, V31, V35, V42, V92, V93, V94, V95, W34, X35, X42, X91,